Description

Callington CH8100 is an ecofriendly, low VOC, water-based dilutable cleaner specifically designed for aircraft exterior surfaces. Cleans and removes typical soils found on the exterior areas of the aircraft. Treated surfaces are left with a clean glossy finish.

Directions for Use

DRY WASH
1. For areas where there is heavy grease, oil, hydraulic oil build-up, we recommend wiping down the area with Callington Actasol
2.  Shake or stir well before use, use undiluted
3. Apply in smooth continuous strokes over the surface in sections, with a clean cloth, mop brush, pad, or spray equipment. For heavy soiling spread and agitate the product over the surface 
4. Leave for five to ten minutes
5. Remove completely by wiping with a clean microfiber/soft cloth while the product is still wet. Replace cloth before it becomes saturated with soil
6. Repeat the process if the section is not clean, then continue to the next section

 WET WASH
1. For areas where there is heavy grease, oil, hydraulic oil build-up, we recommend wiping down the area with Callington Actasol degreaser first.
2. Shake or stir well before use
3. Dilution prior to use:
 - Heavy soiling: use undiluted
 - Medium soiling: dilute 1:1 with water
-  Light soiling: dilute 1:4 with water (Discard diluted solutions within 24 h)
4. Spray or wipe over the surface in sections, with a clean cloth, mop brush, pad, or spray equipment. For heavy soiling spread and agitate the product over the surface.  
5. Allow the product to penetrate for five minutes
6. With a clean microfiber/soft cotton cloth/mop work the product into the surface starting from the bottom. Replace cloth before it becomes saturated with soil.
7. Rinse with water to completely remove product and soil
8. Repeat the process if the section is not clean, then continue to the next section

Approvals

• AMS 1526C
• AMS 1530C
• Boeing D6-1787 ( Rev T)

Physical Properties

Ordering Info